Extinguishing agent: Powder
Capacity: 1 kg
Extinguishing class: 13A - 89B-C
Approval: Ministerial Decree January 2005 UNI EN 3-7 (Made in Italy)
COMPONENTS
- Complete push-button valve
- Control valve
- Safety valve
- Push-button valve piston
- Safety pin
- Pressure gauge à 23 mm
- Piston spring
- Sealing O-ring
- Seal for safety pin
- Suction tube
- 1/8''NPT nozzle
- Powder extinguishing agent 40% MAP
- Steel rod support
- Tank
- PVC support
FEATURES
- Dispensing jet length: 4 meters
- Discharge time: 6 seconds
- Maximum tightening torque*: 7 kgm ÷ 68 Nm
- Range of use: -30° C ÷ +60° C
- Operating pressure: 1.4 Mpa
- Nominal load: 1 kg
- Weighing control (PE) or pressure measurement (PR): PRESSURE
*If mastics and/or similar products are used, the declared tightening torque values between tank and valve are to be decreased by 30 ÷ 40%.
DIMENSIONS
- Diameter: 80 mm
- Total height: 335 mm
- Weight: 2.1 kg
The approved type fire extinguisher, to maintain compliance with the registered model, must be overhauled with original spare parts.
Failure to comply with the above warning will invalidate the approval.
It is supplied with a PVC support for fixing.
You can also purchase this product at our POINT OF SALE in via Enrico Fermi, 10 in Curno in the province of Bergamo.