PORTABLE POWDER FIRE EXTINGUISHER 2 KG

Extinguisher: Powder

Capacity: 2 kg

Fire rating: 13A - 89B-C

Approval: D.M. January 2005 UNI EN 3-7 (Made in Italy)

COMPONENTS

- Complete push-button valve - Control valve - Safety valve - Push-button valve piston - Safety plug - 23 mm manometer - Piston spring - Sealing O-ring - Safety plug seal - Suction tube - 1/8''NPT dispensing nozzle - 40% MAP powder extinguisher - Steel rod support - Tank - PVC support

FEATURES

- Dispensing jet length: 5 meters - Discharge time: 9 seconds - Maximum tightening torque: 7 kgm ÷ 68 Nm - Operating range: -30° C ÷ +60° C - Operating pressure: 1.4 Mpa - Rated charge: 2 kg - Weighing control (PE) or pressure measurement (PR): PRESSURE

If mastics and/or similar products are used, the declared tightening torque values between the tank and valve must be reduced by 30 ÷ 40%.

DIMENSIONS

- Diameter: 100 mm - Total height: 385 mm - Weight: 3.5 kg

To maintain conformity with the registered model, the approved type of extinguisher must be serviced using original spare parts.

Failure to follow the above warning will void the approval.

Comes with a PVC support for installation.

You can also purchase this product at our RETAIL STORE at 10 Enrico Fermi Street, Curno in the province of Bergamo .

Note: The analysis identified the UNI EN 3-7 regulation as relevant to the extinguisher. Additional data is provided in the Features and Dimensions sections. The product complies with the referenced regulation specifications.