SHOCKPROOF WORK HELMET

ANTI-SHOCK WORK HELMET

One size
Colours: Grey
Description: Anti-shock baseball helmet, in polyester/cotton fabric, very ventilated, entirely in mesh fabric for greater comfort.
Equipped with an internal polyethylene shell with EVA comfort pad to absorb impacts. One size adjustable by buckle, from 55 to 62 cm.

MATERIAL
Exterior: polyester/cotton
Inner shell: high density polyethylene.
Shell reinforcement: sponge

Strengths: Entirely in mesh fabric, very ventilated Bi-material, polyethylene shell with 18 holes

Instructions for use: This shock-absorbing headgear does not protect against the consequences of falling or throwing objects or suspended loads in motion. It can never be used as a replacement for the industrial safety helmet compliant with the EN397 standard. The headgear is designed so that the energy generated by an impact is absorbed by the destruction or partial damage of the shell and harness, if the headgear is equipped with such damage, even if this damage is not immediately obvious, it is recommended that the headgear be replaced if it has suffered a considerable impact.
To ensure sufficient protection, the headgear must be adapted or adjusted to the size of the wearer's head.
Users' attention is drawn to the danger arising from modifications to or removal of any original element of the headgear, except for modifications or removals recommended by the manufacturer.
Under no circumstances should accessories be attached to the headgear using a process not recommended by the headgear manufacturer.
Do not use paints, solvents, adhesives or self-adhesive labels on the headgear, except those recommended in the manufacturer's instructions.
To ensure effective protection, this crash helmet must be worn with the visor facing forward and must be adjusted to the size of the user's head, using the adjustment located on the back of the helmet (adjustable from 55/58 cm to 62 cm head circumference). The lifespan of the crash helmet is affected by various factors, such as cold, heat, chemicals, sunlight or misuse. A daily check must be carried out to detect any signs of fragility (cracks, fissures). Discard the headgear if it is damaged. If no defects are found, then the headgear is suitable for the use for which it is intended. The manufacturing date is printed on the inside of each shock helmet (the year surrounded by a circle with the month indicated by an arrow). Under normal conditions of use, this shock helmet offers adequate protection for 2 or 3 years (after first use) or 5 years from the date of manufacture.

Limitations of use: Do not use outside the scope of application defined in the instructions for use above. Do not apply paints, solvents, adhesives or other markings that do not comply with the instructions given by the manufacturer. Under no circumstances should a component other than those of DELTA PLUS be used with the shock helmet. This shock helmet does not contain any substances known to cause allergies. However, if a sensitive person experiences an allergic reaction, leave the risk area, remove the headgear and consult a doctor.

Storage instructions: When the shockproof headgear is no longer in use, or during transport, it should be stored in a dry, cool, dark and frost-free place, in a place that ensures that no chemicals or sharp objects can deform it if they fall on it.

Cleaning / maintenance instructions: The shockproof headgear can be cleaned and disinfected with a rag soaked in a low-concentration detergent solution. Do not use any abrasive or corrosive chemicals. If it is not possible to clean the headgear in this way, it must be replaced.

Performance: Complies with the requirements of European Directive 89/686, in particular in terms of ergonomics, harmlessness, comfort, ventilation and softness, and with the EN812:1997/A1:2001 standards.

You can also purchase this product in our POINT OF SALE in via Enrico Fermi, 10 in Curno in the province of Bergamo.